GW Instek GDS-2000E Series User Manual

MEASUREMENT
65
Select Units
6. To change the units of the vertical
position, press V Unit.
Units
Base (source wave units), % (ratio)
Base or Ratio
Reference
7. To set the 0% and 100% ratio
references for the current cursor
position, press Set Cursor Positions
As 100%.
Example
Horizontal
cursors
Vertical
cursors
FFT
FFT has different content. For
FFT details, see page 70.
,
Frequency/Time: cursor1, cursor2
,
dB/V: cursor1, cursor2
Delta (difference between cursors)
d/dt

GW Instek GDS-2000E Series Specifications

General

Brand	GW Instek
Model	GDS-2000E Series
Category	Test Equipment
Language	English