GW Instek GSP-9300 User Manual

GSP-9300 User Manual
140
Auto Scale[F4]
Toggles auto-scaling
on/off.
7. Press Deviation Axis[F4] to set deviation
(vertical) parameters:
Ref.Value[F1]
Offsets the reference
position (in frequency).
Ref.Pos[F2]
Sets the reference
position of the waveform
on a vertical grid
subdivision (1:10).
Scale/Div[F3]
Sets the vertical grid
division scale.
Auto Scale[F4]
Toggles auto-scaling
on/off.
Operation:
trigger
configuration
8. Press AF Trigger[F5]>Trigger Setup[F1] to set the
triggering conditions:
Edge Slope[F1]
Sets the trigger to rising
or falling edge.
Trigger Mode[F2]
Sets the triggering mode:
Norm.: Normal trigger
Sgl.: Single trigger
Cont.: Continuously
trigger
Trigger Level[F3]
Sets the trigger level as a
frequency. (The
displayed level will only
remain for a few
moments)
Trigger Delay[F4]
Sets the trigger delay
time:
0 to 1ks
9. Press Return[F6] to return to the AF Trigger
menu and set the remaining triggering options:

GW Instek GSP-9300 Specifications

General

Brand	GW Instek
Model	GSP-9300
Category	Measuring Instruments
Language	English