GW Instek GSP-9300 - Page 157

ADVANCED OPERATION
155
Operation:
configuration
1. Press
Measure
> Demod[F2]>FSK[F5]>More[F7]>
Limit[F4] and set the limits.
Freq. Deviation[F2]
If the measured
deviation is above this
limit, it will be judged as
Fail.
Carr. Offset[F3]
If the measured carrier
offset is above this limit,
it will be judged as Fail.
Carr. Power[F4]
If the measured carrier
power is above this limit,
it will be judged as Fail.
2. Press Limit[F1] and turn Limit on.
3. The FSK Measurement area in the bottom half
of the screen will now include Pass/Fail
indicators for the frequency deviation, carrier
offset and carrier power.
Pass:
Fail:
Example
Pass/Fail indicators