GETTING STARTED
15
Sets the span, with options for full
span, zero span and last span.
Sets the amplitude reference level,
attenuation, pre-amplifier
controls, scale and other options
for attenuation and scale.
Automatically searches the peak
signal with maximum amplitude
and displays it with appropriate
horizontal and vertical scales.
Sets the resolution bandwidth,
video bandwidth, average type
and turns the EMI filter on/off.
Sets the sweep time and gate time.
Toggles the Sweep Control
between Fast and Normal mode.
Accesses measurement options
such as ACPR, OCBW,
demodulation measurements,
SEM, TOI, 2FSK, phase jitter and
other advanced measurements.
Dedicated EMI testing and setup
menu.
Sets traces and trace related
functions.
Sets and tests Pass/Fail limit lines.
To Next Page
Loading...
