GW Instek GSP-9300 - Page 178

GSP-9300 User Manual
176
SEM measurements
Absolute
limit line
User Defined
Parameters
1. Press Setup[F1]>User Define[F6]to set SEM
measurement to user defined parameters.
2. Press Meas Type[F1] choose between
TotalPwrRef[F1] or PSDRef[F2].
3. Press Ref. Channel[F2] and set the following:
ChanIntegBW[F1]
Sets the channel
integration bandwidth.
Chan Span[F2]
Sets the channel span
RBW[F3]
Sets the resolution
bandwidth.
TotalPwrRef[F4]/
PSDRef[F4]
Sets the total
power/PSD reference
level.
4. Press Return[F7] to return to the previous
menu.