GW Instek GSP-9300 - Page 232

GSP-9300 User Manual
230
Insert Sequence
Inserts another sequence into the current
sequence.
1. Press Do Sequence[F4]> and select a sequence to
insert into the current sequence.
 The selected sequence will be inserted as a step.
Note
The current sequence cannot be inserted into
itself.
Delete Step
Any step in the Sequence Editor can be deleted.
1. Use the arrow keys on the front
panel to highlight the step you
wish to delete.
2. Press Delete Step[F5] > to delete the step.
 The selected step will be removed from the Sequence
editor.
Stop Editing
1. Press Stop Edit[F6].
2. The icon turns off.