GW Instek GSP-9300 - Page 242

GSP-9300 User Manual
240
3. Data Source[F3] will automatically be set to
Power State.
4. Press PMET Record Option[F4] and set the
recording options:
Record Stop[F1]:
Sets the recording time for
automatic data logging:
00 :00 :00 (continuous) or
00 :00 :01 ~ 23 : 59: 59
Record Step[F2]:
20msec ~ 999sec
5. Press Save To[F1] and select a destination
source:
Local :
Internal memory
SD Card:
External micro SD card
Note
The micro SD card option will only be available
when a micro SD card is inserted into the front
panel port.
6. After a destination has been selected, recording
options appear.
7. To name the log file, press
Name[F1]. Name the selected file
using the F1~F7 keys, as shown
below or use the numeric keypad
to enter numbers.
7 8 9
654
1 2 3
/0
Limitations:
 No spaces
 Only 1~9, A~Z, a~z characters allowed