GW Instek GSP-9300 - Page 253

FILE
251
Correction
Correction data contains the following
correction (line) data:
 Point number
 Frequency value of point
 Gain offset of point
 Unit
Sequence
The sequence files contain the sequence number
and step operations for that sequence. This data
is not designed to be user editable.
Tracking
Generator
The TG data contains:
 TG level
 TG level offset
 TG level step
 Power sweep state and value
 Normalized reference level
 Normalized reference position
 Normalized state
Power Meter
The power meter data contains:
 Date
 Time
 Power in dBm
 Start time/end time
 Step time
Using the File Explorer
Connect External
Memory
To view files on a USB flash drive or micro SD
card, insert the appropriate device into the front
panel port.
Selecting files
1. Press
File
>File Explorer.
2. Select memory location: