GW Instek GSP-9300 User Manual

REMOTE CONTROL
271
Connection
Connect the 3G USB modem to the front panel
USB A port.
The 3G status icon will appear when the 3G
USB adapter is connected. When it is first
connected it will be grayed-out to indicate that
it is connected but not activated.
GSP
3G USB Adapter
USB A
PORT
Settings
1. Insert the 3G USB modem into the front panel
USB A port and wait for the 3G USB icon to
appear.
2. Press
System
>More[F7]>RmtInterface[F1]>
LAN[F2]>WLAN Config[F2]>Apply[F6] and wait
for the 3G USB modem to establish the WLAN
settings.
“Finish‼”, is shown when the configuration is
complete.
3. The network settings will be displayed in the
System menu icons.

GW Instek GSP-9300 Specifications

General

Brand	GW Instek
Model	GSP-9300
Category	Measuring Instruments
Language	English