GW Instek GSP-9300 - Page 274

GSP-9300 User Manual
272
WLAN settings
Display Icon
The 3G USB icon turns green when a
successful connection has been made.
Set Password
The password on the LXI webpage can be set
from the spectrum analyzer. The password is
shown in the system information.
By default the password is set to: lxiWNpwd
4. Press
System
>More[F7]>RmtInterface
Config[F1]>LAN[F2]>LXIPassword[F3] to set
the password.
5. Enter the password using the
F1~F7 keys, as shown below, or
use the numeric keypad to enter
numbers:
7 8 9
654
1 2 3
/0
Limitations:
 No spaces
 Only 1~9, A~Z, a~z characters allowed