password, the department, the template, the role and the
authencaon mode.
Steps
1.
Move the cursor and select User → New to enter the New
page.
Figure 7-5 New Page
2.
Enter the new user's parameters.
ID (Employee ID)
By default, the ID No. will be increased in sequence. You can
edit the ID according to your preference.
Note
•
The ID refers to the user aendance serial No.
•
The ID should be between 1 and 99999999 and should
not start with 0.
•
The ID should be unique.
Name
Enter the new user name.
Note
•
Press the up or down key on the keypad to change the
input method.
•
Up to 64 characters are allowed in the user name.
Card
Set: Swipe card on the card swiping area or enter card No.
manually, and select a card property.
View Info.: View the user's added card informaon.
Note
•
The card No. is required.
•
Up to 20 digits can be contained in the card No.
•
The card No. can be 0.
•
The card No. can start with 0 when it contains more than
one numbers. E.g. 012345.
•
The card No. should be unique.
•
If the device does not support swiping card, you should
enter the card No. manually. If you need to enter the card
17
To Next Page
Loading...
Need help?
General
