HIKVISION DS-K1T804A Series User Manual

Enter the device password.
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters,
including at least three kinds of following categories: upper
case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product.
And we recommend you change your password regularly,
especially in the high security system, changing the
password monthly or weekly can
beer protect your
product.
Proper
conguraon of all passwords and other security
sengs is the responsibility of the installer and/or end-user.
7.
Oponal: Check Synchronize Time to synchronize the device
me with the PC running the client aer adding the device to
the client.
8.
Oponal: Check Import to Group to create a group by the
device name.
Note
You can import all the channels of the device to the
corresponding group by default.
9.
Click OK to add the device.
Add Mulple Detected Online Devices
For detected online devices sharing the same user name and
password, you can add them to the client in a batch.
Before You Start
Make sure the to-be-added devices are online.
Steps
1.
Enter the Device Management module.
2.
Click Device tab on the top of the right panel.
3.
Click Online Device to show the online device area at the
boom of the page.
The searched online devices are displayed in the list.
4.
Select mulple devices.
Note
For the inacve device, you need to create the password for it
before you can add the device properly. For details, refer to .
5.
Click Add to open the device adding window.
6.
Enter the required
informaon.
User Name
By default, the user name is admin.
Password
Enter the device password.
40

HIKVISION DS-K1T804A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804A Series
Category	IP Access Controllers
Language	English