HIKVISION DS-K1T804A Series User Manual

•
The aendance data will be wrien to the third-party
database.
•
During synchronizaon, if the client disconnects with the
third-party database, the client will start reconnecon every
30 mins.
Aer being reconnected, the client will synchronize
the data recorded during the disconnected me period to
the third-party database.
Congure Break Time
You can add break me and set start me, end me, duraon,
calculaon
mode and other parameters for the break. The added
break me can also be edited or deleted.
Steps
1.
Click Time &
Aendance → Timetable .
The added metables are displayed in the list.
2.
Select an added metable or click Add to enter seng
metable page.
3.
Click Break Time to enter Break Time page.
4.
Click Break Time
Sengs.
5.
Add break me.
1) Click Add.
2) Enter a name for the break me.
3) Set related parameters for the break me.
Start Time / End Time
Set the me when the break starts and ends.
No Earlier Than / No Later Than
Set the earliest swiping me for starng break and the
latest swiping
me for ending break.
Break Duraon
The duraon from start me to end me of the break.
Calculaon
Auto Deduct
The xed break duraon will be excluded from work
hours.
Must Check
The break duraon will be calculated and excluded
from work hours according to actual check-in and
check-out
me.
Note
If you select Must Check as calculaon method, you
need to set aendance status for late or early returning
from break.
6.
Click Save to save the sengs.
7.
Oponal: Click Add to connue adding break me.
Congure Report Display
You can congure display contents displayed in the aendance
report, such as the company name, logo, date format, me
format, and mark.
83

HIKVISION DS-K1T804A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804A Series
Category	IP Access Controllers
Language	English