5.4 Starting and Stopping Recording
91
5
Press the DATA RESET key when [ANALYZE] appears)
A confirmation message is displayed.
Executes data reset
Recording Again, or Erasing Recording Data (Reset)
When recording stops, the [ANALYZE] message indicates that data has been stored in in-
ternal memory.
To restart measurement, erase the data stored in the instrument (perform data reset).
[ANALYZE]
[SET]
DATA RESET has been
pressed.
ALL DATA from internal
memory will be deleted.
Continue?
Yes: ENTER No: ESC
Recorded data is not erased even when the instrument is turned off. However, it
is erased by executing Data Reset.
To perserve measurement data, copy it to a computer via USB cable
To Next Page
Loading...
