11.3 Error Indication
179
11
Chapter11 Maintenace and Service
Cannot copy a folder not un-
der the root folder.
Attempted to copy a folder within a non-
root folder.
Try again from the computer.
Cannot delete a folder not un-
der the root folder.
Attempted to delete a non-root folder.
Cannot delete a folder having
another folder.
Attempted to delete a folder containing an-
other folder.
Skip copying a file having in-
valid character and folder not
under the root folder.
During folder copy, attempted to copy a
file or folder with an invalid name.
File or folder not copied.
Perform the copy operation from the computer.
Input the name. No file or folder name has been specified.
Enter a file or folder name.
See "Chapter 7 Data Saving and File Opera-
tions" (p. 103)
Invalid setteing file.
"Load Setting File" attempted without a
valid setting configuration file selected
(wrong file type, or corrupted or incompat-
ible content).
Select a valid setting configuration file.
Settings cannot be loaded unless instrument
options and save settings are the same as
when saved.
See "7.9 Reloading Setting Configurations"
(p. 116)
Cannot find the firmware up-
date file in the root.
Attempted firmware update without an up-
date file.
Copy the update file to the root folder of the
storage media, and try again.
Cannot find either CF card or
USB memory stick.
CF card or USB drive not found when
copying files and folders.
Confirm that the storage media is inserted.
See "7.1 Inserting and Removing Storage
Media" (p. 104)
Cannot copy the folder.
Same file name already ex-
ists.
When copying a folder, a duplicate file
name was found on the destination.
Select a different name for the file or folder.
See "7.10.4 Renaming Files and Folders" (p.
121)
Cannot delete the file having
invalid character file name in
this folder.
Attempted to delete a folder containing a
file with an invalid character in its name,
entered by computer or malfunction.
Try again from the computer.
Cannot copy the file.
Same folder name already
exists.
The name of a file to be copied or created
as a setting configuration file duplicates an
existing folder name.
Select a different name for the file or folder.
See "7.10.4 Renaming Files and Folders" (p.
121)
Copy after changing the fold-
er name.
Same folder name already
exists.
The name of a folder to be copied dupli-
cates an existing folder name in the root
folder of the storage media.
Select a different folder name.
See "7.10.4 Renaming Files and Folders" (p.
121)
CF card is not ready.
Failed to save.
Cannot save because CF card not found.
Check that a CF card or USB drive is inserted.
See "7.1 Inserting and Removing Storage
Media" (p. 104)
USB memory stick is not
ready.
Failed to save.
Cannot save because USB drive not
found.
Cannot move to [FILE] TAB
during auto saving.
Attempted to open the File Operation
screen during auto-saving.
The File Operation screen cannot be opened
during auto-saving. Wait until auto-saving is fin-
ished.
Cannot execute during auto
saveing.
Attempted manual saving, waveform sav-
ing, or screen capture during auto-saving.
Manual saving, waveform saving, and screen
capture are not available during auto-saving.
Wait until auto-saving is finished.
Cannot execute during out-
putting data.
Attempted to print a screen capture image
while the printer is busy.
Try again when printing is finished.
Failed to copy.
Or, there is a file cannot be
copied.
A problem occurred while copying. Try again from the computer.
Error display Cause Remedy
To Next Page
Loading...
