Hioki 3560 - Chapter Summary

v
────────────────────────────────────────────────────
Chapter Summary
────────────────────────────────────────────────────
C
hapter Summary
This manual consists of the following chapters.
"Introduction", "Inspection", "Safety Notes", "Notes on Use" include some
important notes which you should read before using the instrument.
Chapter 1 Overview
Outlines the instrument, and describes the nomenclatures and functions
of the components.
Chapter 2 Specifications
Describes general specifications and measurement ranges.
Chapter 3 Preparing for Measurement
Describes how to turn on the power, connect the measurement leads, and
set the power-supply frequency.
Chapter 4 Measurement Procedure
Describes basic measurement procedures.
Chapter 5 Comparator Function
Describes the setup and functions of the comparator.
Chapter 6 External Control Terminal and External Output Terminal
Describes external control via the external-control terminal and external-
output terminal.
Chapter 7 RS-232C Interface
Describes external control via RS-232C.
Chapter 8 GP-IB Interface (Option)
Describes external control via GP-IB.
Chapter 9 Printer Interface (Option)
Describes Printer Interface.
Chapter 10 Useful Information and Advanced Measurement
Provides information on the advanced applications of the 3560
instrument.
Chapter 11 Maintenance and Service
Describes service operations and optional equipment of the 3560
instrument.