129
────────────────────────────────────────────────────
10.6 IEC 512-2, JIS C 5402 and JIS C 5441
────────────────────────────────────────────────────
0.6 IEC 512-2, JIS C 5402 and JIS C 5441
■ IEC 512-2
Electromechanical components for electronic equipment;basic testing
procedures and measuring methods.
Measurement frequency: 2 kHz, max.
Measurement Accuracy: 10%, max
Open-circuit terminal voltage: 20 mVpeak, max
Measurement current: 100 mA, max
■ JIS C 5402 (Japanese Industrial Standards)
Testing methods of switches for use in electronic equipment.
Method for test of connectors for use in electronic equipment.
Measurement frequency: 2 kHz or less
Measurement Accuracy: 10%
Open-circuit terminal voltage: 20 mVpeak
Measurement current: 100 mA or less
■ JIS C 5441 (Japanese Industrial Standards)
Testing methods of switches for use in electronic equipment.
Low-voltage and low-current method
Measurement frequency: 2 kHz or less
Open-circuit terminal voltage: 20 mVpeak or less
Measurement current: 100 mA or less
To Next Page
Loading...
