Hioki 3560 - Inspection; Introduction

i
────────────────────────────────────────────────────
Introduction
────────────────────────────────────────────────────
I
ntroduction
I
nspection
Thank you for purchasing the HIOKI "3560 AC mΩ HiTESTER" To
obtain maximum performance from the instrument, please read this
manual first, and keep it handy for future reference.
When you receive the instrument, inspect it carefully to ensure that no
damage occurred during shipping. In particular, check the accessories,
panel switches, and connectors. If damage is evident, or if it fails to
operate according to the specifications, contact your dealer or Hioki
representative.
Accessories
9287-10 CLIP TYPE LEAD 1
Three-core power cord (L type) 1
Instruction manual 1
Basic instructions 1
Options
9455 PIN TYPE LEAD
9461 PIN TYPE LEAD
9465 PIN TYPE LEAD
9467 LARGE CLIP TYPE LEAD
9452 CLIP TYPE LEAD
9453 FOUR TERMINAL LEAD
9466 REMOTE CONTROL SWITCH
9454 ZERO ADJUSTMENT BOARD
9588 GP-IB INTERFACE
9151-02 GP-IB CONNECTOR CABLE (2 m)
9151-04 GP-IB CONNECTOR CABLE (4 m)
9589 PRINTER INTERFACE
9203 DIGITAL PRINTER
9425 CONNECTION CABLE (2-meter long for connecting to the 9425)
9233 RECORDING PAPER (Ten 10-meter rolls for the 9233)