Hioki 3560 - GP-IB Command

113
────────────────────────────────────────────────────
8.2 Operating Procedure (GP-IB)
────────────────────────────────────────────────────
8
.2.14 GP-IB Command
Command Function
GTL
Go To Local
The remote state is canceled, and the system goes into th
e
local state.
LLO
Local Lock Out
All keys, including the
LOCAL key, becomes out of
operating.
DCL
Device Clear
Clears the input buffer and the output queue.
SDC
Selected Device Clear
Clears the input buffer and the output queue.
GET
Group Execute Trigger
During the holding state, perform one-shot measurement.
NOTE
Interface functions permit use of the following commands:
Using the GET (GroupExecute Trigger) command in non-hold mode will
produce an execution error.
The following items are the same as for the RS-232C interface. See
Chapter 7 "RS-232C Interface."
Message Code Table
Common command
Message reference
Common command
Messages
Initialize Item List