Hiwin D1-N Series Assembly And Commissioning Instructions

12 / 183
Assembly and Commissioning Instructions Servo amplifier D1-N

15.10.2015
2.2
Disclaimer in the event of modification or improper use
Modifications not described in this assembly and commissioning instructions must
not be undertaken on the drive amplifier. If a modified construction is needed,
please contact HIWIN GmbH directly.
The manufacturer assumes no liability in the event of modifications or improper
assembly, installation, commissioning, use, maintenance or repairs.
Only genuine parts from HIWIN are approved as spare parts and accessories.
Spare parts and accessories not supplied by HIWIN are not checked for operation
with HIWIN drive amplifiers and may restrict operational safety. HIWIN assumes no
liability for damage caused through use of non-approved spare parts and accesso-
ries.
2.3
Qualified trained staff
The drive amplifiers may only be fitted, integrated in superordinate systems, start-
ed up, operated and maintained by qualified trained staff. Staffs are considered
qualified and trained if:
• they have appropriate technical training and
• have been instructed by the machine operator in operation and the valid
safety guidelines and
• can assess the anticipated risks and
• have read and understood these assembly and commissioning instructions
in full and have access to them at all times.

Hiwin D1-N Series Specifications

General

Brand	Hiwin
Model	D1-N Series
Category	Amplifier
Language	English