160 / 183
Assembly and Commissioning Instructions Servo amplifier D1-N
The “Lightening” software logs all errors and warnings since the drive amplifier's
logic was last restarted. You can display the logged errors and error statistics us-
ing the “Errors and Warnings Log”. You can also save this log as a text file on your
PC.
Please refer to section 11 for the meaning of the individual errors and how to rem-
edy them.
You can start the “Errors and Warnings Log” from the main “Lightening” operating
interface by going to the “Conf./Tune” menu item.
Figure 9.60: Starting “Errors and Warnings Log”
The “Errors and Warnings Log” operating interface shows a list of all the errors
which have occurred since the drive amplifier was last restarted. They are sorted
in chronological order. The Time (seconds) column states at how many seconds
after the device start the error occurred.
Figure 9.61: “Errors and Warnings Log”
To Next Page
Loading...