72 / 183
Assembly and Commissioning Instructions Servo amplifier D1-N
The “status” field contains LEDs to evaluate the device status
, : Active status
, : Inactive status
The last messages to be displayed are shown in the “errors and warnings” area. In
this example, the lack of a power supply to the drive amplifier is reported.
The setting of user units can be adapted in this area using the “Position Units”
drop-down list. Depending on the drive used, different units are provided for linear
and rotary systems.
The other drop-down lists can be used to clearly view any drive parameters. The
units for e.g. speed and position are adapted automatically depending on the selec-
tion made in the “Position Units” field.
To Next Page
Loading...
Need help?
General