Hiwin D1-N Series - Cables for Encoder Systems

182 / 183
Assembly and Commissioning Instructions Servo amplifier D1-N

15.10.2015
13.4
Cables for encoder systems
Description
Length
Item no.
HIWIN encoder cable for analogue encoder systems
,
drag chains, on motor side with M17-connector, on
D1-N side with Sub-D-connector for X11
3 m 8-10-0685
5 m 8-10-0686
7 m 8-10-0687
10 m 8-10-0688
HIWIN encoder cable for digital encoder systems
,
drag chains, on motor side with M17-connector, on
D1-N side with Sub-D-connector for X10
3 m 8-10-0690
5 m 8-10-0691
7 m 8-10-0692
10 m 8-10-0693
HIWIN encoder cable for analogue encoder systems
and digital Hall sensor, suitable for drag chains, on
motor side with M17 connector, on D1-N side with sub-
D connector for X10 and X11.
3 m 8-10-0766
5 m 8-10-0767
8 m 8-10-768
10 m 8-10-0769
12 m 8-10-0770
Table 13.4 Item numbers for encoder cable