Hiwin D1-N Series Assembly And Commissioning Instructions

Assembly and Commissioning Instructions Servo amplifier D1-N  15.10.2015
155 / 183
9.7.4
“Advanced gains” – “Analog input”
Figure 9.52: “Advanced gains” – “Analog input”
If a nominal analogue value is used for speed or torque/force control, an offset
correction can be undertaken.
If the voltage value at zero volts is not zero or is slightly unstable, the negative
effect of this offset can be corrected by pressing the
“Set Offset”
button.

Hiwin D1-N Series Specifications

General

Brand	Hiwin
Model	D1-N Series
Category	Amplifier
Language	English