70 / 183
Assembly and Commissioning Instructions Servo amplifier D1-N
Figure 8.13: “Tools” menu
This menu contains other useful functions relating to management of the drive
amplifier. It also contains tools for checking the settings.
Overview of functions:
• “Communication setup” – setting connection parameters to device
• “Open plot view” – depiction and analysis of the recorded data
• “Data collection” – recording of parameter values in real time
• “Scope” – oscilloscope for evaluating travel behaviour and controller set-
ting
• “Encoder test/tune” – testing encoder function at analogue sine-cosine en-
coders
• “PDL” – device's own programming language for simple processes
• “Loop constructor” – display and adaptation of control circuit structure
• “Reset Amplifier” – device restart
• “Upgrade/Downgrade firmware” – loading of software updates
• “Set parameters to factory default” – reset drive amplifier to factory set-
ting
The
menu is used to select the language.
The
menu displays version info about the software installed.
To Next Page
Loading...
Need help?
General