▲
▼
▲▼
You can customize the MEMORY
POSITION LINK setting in position
setup.
While ‘‘POSITION SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
Position Setup
Multi-Information Display
106
INFO button
SEL/RESET button
Touring model is shown.
11/08/01 08:34:39 31SZA630_113
To Next Page
Loading...
