Honda 2012 Pilot - To Program the Ignition Switch Unlock Mode

Unlocks the driver’s door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
all doors and tailgate
unlock feature
driver’s door unlock
feature.
Make sure the shift lever is in the
Park (P) position.
Pushandholdtherearofthe
master door lock switch on the
driver’s door. You will hear a click.
Continue to hold the switch:
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Push and hold the brake pedal,
and move the shift lever out of P.
Pushandholdtherearofthe
master door lock switch on the
driver’s door. You will hear a click.
Continue to hold down the switch:
Or, until you hear two more
clicks (after about 10 seconds)
to activate
.
Until you hear another click
(after about 5 seconds) to
activate the driver’s door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate all doors and tailgate
unlock feature.
Until you hear another click
(after about 5 seconds) to
activate
Turn the ignition switch to the
LOCK (0) position.
Release the switch, and within 20
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
4.
5.1.
2.
3.
6.
3.
4.
To program the Ignition Switch
Unlock mode:
Door Locks
142
11/08/01 08:40:38 31SZA630_149