Honda 2012 Pilot - Replacing a Rear License Plate Bulb

Turn on the parking lights and
check that the new bulb is
working.
Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
Place a cloth on the edge of the
lens segment to prevent
scratching. Insert a small flat-tip
screwdriver between the left edge
of the lens and the housing. The
lens will come down.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
3.
4.
1.
2.
Replacing a Rear License Plate
Bulb
Lights
592
BULB
LENS
SCREWDRIVER
LENS
CLOTH
11/08/01 11:07:31 31SZA630_599