Your vehicle has halogen headlight
bulbs. When replacing a bulb, handle
it by its base, and protect the glass
from contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.
Open the hood.
If you need to change the
headlight bulb on the driver’s side,
remove the front end of the air
intake duct by pulling it out.
Theheadlightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustmentsshouldbedonebyyour
dealer or another qualified
technician.
The high beam headlight/daytime
running light bulb and the low beam
headlight bulb are replaced the same
way.
1.
Headlight Aiming Replacing a Headlight/Daytime
Running Light Bulb
Lights
586
CONNECTOR
BULB
HIGH BEAM HEADLIGHT/
DAYTIME RUNNING LIGHT
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
11/08/01 11:06:21 31SZA630_593
To Next Page
