Tighten the strap according to the
seat maker’s instructions.
Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
Each third row seat has a tether
anchorage point behind the seat-
back.
If the child seat cannot be installed
properly or interferes with the
head restraint when in the highest
position, remove the head
restraint. Make sure the removed
head restraint is secured in a safe
place.
For the center seating position,
lower the head restraint first.
Route the tether strap over the
head restraint and seat-back, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
After properly securing the child
seat (see pages and ), lift the
left and right head restraint, then
route the tether strap over the
seat-back and through the head
restraint legs.
Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
1.
2.
3.
2.
3.
4.
5.
5352
CONTINUED
Third Row Installation
Installing a Child Seat
Driver and Passenger Safety
55
11/08/01 08:25:36 31SZA630_062
To Next Page
Loading...
