Locks all doors and tailgate when the
shift lever is moved out of the Park (P)
position.
Make sure the shift lever is in the
Park (P) position.
Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Pushandholdthefrontofthe
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Pushandholdthefrontofthe
master door lock switch on the
driver’s door until you hear a click
(after about 5 seconds).
Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position. 4.
1.
2.
3.
4.
3.
CONTINUED
To program the Park Lock mode:
Door Locks
Instruments and Controls
139
11/08/01 08:39:56 31SZA630_146
To Next Page
Loading...
