Honda 2012 Pilot - Seat Belt System Components; Additional Information about Your Seat Belts

If either the driver or a front
passenger does not fasten their seat
belt while driving, the beeper will
sound and the indicator will flash
again at regular intervals.
This system monitors the front seat
belts. If you turn the ignition switch
to the ON (II) position before your
seat belt is fastened, the beeper will
sound and the indicator will flash. If
your seat belt is not fastened before
the beeper stops, the indicator will
stop flashing but remain on.
If a front passenger does not fasten
their seat belt, the indicator will
come on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
Your seat belt system includes lap/
shoulder belts in all seating positions.
The front seat belts are also
equipped with automatic seat belt
tensioners.
You will also see a ‘‘FASTEN SEAT
BELT’’ or ‘‘FASTEN PASSENGER
SEAT BELT’’ message on the multi-
information display (see page ).
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your front passenger
to fasten your seat belts.
When an infant or small child is
riding there, the indicator may not
come on and the beeper may not
sound.
93
On Touring models
Additional Information About Your Seat Belts
Seat Belt System Components
22
11/08/01 08:19:50 31SZA630_029