To install a LATCH-compatible child
seat in the passenger’s side seating
position of the third row:
Unlatch the detachable seat belt
anchor latch and retract the seat
belt all the way into the passenger’s
side panel. Place the latch plate
and anchor latch in their holding
slots (see page ).
You can find lower anchors in the
slits in the seat-backs.
The location of each lower anchor is
indicated by a small button above the
anchor point.
Followsteps1through6ofthe
second row installation on pages
and .
If the child seat cannot be installed
properly or interferes with the
head restraint when in the highest
position, remove the head
restraint. Make sure the removed
head restraint is secured in a safe
place.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
1.
2.
3.
4.
163
5048
Installing a Child Seat
Driver and Passenger Safety
51
LOWER ANCHORS
11/08/01 08:24:56 31SZA630_058
To Next Page
Loading...
