Honeywell MX7 Tecton User Manual

8 - 15
HHP Symbologies
Advanced properties are available when an integrated Hand Held Products imager is installed in the MX7 Tecton.
Advanced properties are applicable regardless of the ID type selected (AIM or HHP). HHP = Hand Held Products.
Not all HHP symbologies have Advanced options. Symbologies with Advanced options are documented on the follow-
ing pages. Symbologies with Advanced button function are marked with an asterisk in the table below.
The Data Collection Wedge does not manage mutually exclusive option selections. The user is responsible for under-
standing the options that can co-exist for the data collection device. The documentation provided from the manufac-
turer of the scanner/imager being managed describes the interaction between symbologies and their configurations.
Advanced Button (Hand Held Products Imager Only)
The Advanced button is only available if a Hand Held Products Imager is in use. Because the Hand Held Products
imager does not support configuration bar codes (available in the Integrated Scanner Programming Guide), the
Advanced button function allows configuration parameters to be set for many of the HHP imager supported bar codes.
If there are advanced configuration options for the selected Hand Held Products Imager symbology, an Advanced but-
ton is displayed in the lower right corner of the panel. When the Enable check box is empty, the Advanced button is
dimmed for a symbology with advanced configuration parameters. Not all bar code symbologies have configuration
parameters so the Advanced button is not present for all symbologies.
Sections that follow are the HHP symbologies with advanced configuration parameters that can be changed by the
user.
Symbology
All Composite ISBT-1 RSS AUSPOST
Aztec Coupon Matrix 2 of 5 Strt25 JapanPost
BPO DataMatrix Mesa * Strt32 Planet *
Codabar * EAN * MSI * Telepen * DutchPost
Codablock EAN13 * Other TLC ChinaPost
Code 11 * EAN128 PDF417 Trioptic39 Code16K
Code32 GenCode128 Plessey UPCA * Usps4cb
Code 39 * IATA25 Posicode * UPCE0 * Maxicode
Code 49 IDTag Postnet UPCE1 * MicroPDF
Code 93 Interleaved 2 of 5 * QR CANPOST OCR *
Code 128

Honeywell MX7 Tecton Specifications

General

Display diagonal	3.5 \
Display resolution	240 x 320 pixels
Display number of colors	-
Internal memory	0.256 GB
Internal memory type	RAM
Compatible memory cards	SD
Maximum memory card size	4 GB
Processor family	PXA 320
Processor frequency	0.806 GHz
GPS (satellite)	No
Operating system installed	Windows CE 6.0
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 100 %
Battery capacity	2200 mAh
AC adapter output current	7.4 A
Product color	Black, Blue
Keyboard layout	Alphanumeric
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, Code 93, EAN-13, GS1-128 (UCC/EAN-128), PLANET, Plessey, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code

Weight and Dimensions

Depth	50 mm
Width	86 mm
Height	223 mm
Weight	595 g