HPE Apollo 2000 User Manual

HPE Apollo 2000 System
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett Packard Enterprise
assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy
levels.
Part Number: 797871-006
June 2016
Edition: 6

HPE Apollo 2000 Specifications

General

Form Factor	2U
Memory Type	DDR4
Max Processors	2
Memory Slots	16 DIMM slots per server tray
Storage Options	SAS, SATA
Networking	FlexibleLOM
Network	1/10/25/40/100 GbE options
Power Supply	Redundant Power Supplies
Power Supply Options	1600W
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Storage	Up to 24 drives

Summary

Component Identification

Chassis Front Panel Components

Details components on the front of the HPE Apollo r2200, r2600, and r2800 chassis.

Chassis Rear Panel Components

Identifies components on the rear panel of the chassis for 1U and 2U node configurations.

Node Rear Panel Components

Details rear panel connectors for 1U and 2U server nodes.

Operations

Powering Nodes

Instructions on how to power up and power down server nodes.

Removing Components

Procedures for removing RCM module, power supply, security bezel, and drives.

Chassis Removal and Installation

PCI Riser Cage Assembly Handling

Setup

Server Warnings and Cautions

Important safety warnings and cautions for installing and operating the server.

Hardware Options Installation

Drive Options

Memory Options

Accelerator Options

Software and Configuration Utilities

System Utilities and Configuration

Firmware and OS Updates

Guides on updating system firmware and drivers, and OS support.

Troubleshooting

Troubleshooting Resources

Lists guides and resources for troubleshooting ProLiant servers.

Electrostatic Discharge

Preventing Electrostatic Discharge