EasyManuals Logo

HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Guide

HPE FlexNetwork 5510 HI Series
331 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
101
Command
Remarks
be the same as the port number of
the listening service on the NQA
server.
6.
packets.
source ip
ip-address
By default, the packets take the
primary IP address of the output
interface as their source IP
address.
The source IP address must be
the IP address of a local interface,
and the interface must be up.
Otherwise, no UDP packets can
be sent out.
7.
source port number of UDP
packets.
source port
port-number
By default, no source port number
is specified.
8.
size for each UDP packet.
data-size
size The default setting is 100 bytes.
9.
packets.
data-fill
string
The default payload fill string is
the hexadecimal number
00010203040506070809.
10. (Optional.) Set the number of
UDP jitter operation.
probe packet-number
packet-number
The default setting is 10.
11.
for sending UDP packets.
probe packet-interval
interval
The default setting is 20
milliseconds.
12. (Optional.) Specify how long
response times out.
probe packet-timeout
timeout
The default setting is 3000
milliseconds.
NOTE:
Use the
display nqa result or display nqa statistics command to verify the UDP jitter operation.
The display nqa history command does not display the UDP jitter operation results or statistics.
Configuring the SNMP operation
The SNMP operation measures the time for the NQA client to get a response packet from an SNMP
agent.
To configure the SNMP operation:
Command
Remarks
1. Enter system view.
system-view
N/A
2.
view.
nqa
entry
admin-name
operation-tag
By default, no NQA operations exist.
3. Specify the SNMP type and
enter its view.
type snmp
N/A
4.
address of SNMP packets.
destination ip
ip-address
By default, no destination IP address
is specified.

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals