EasyManuals Logo

HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Guide

HPE FlexNetwork 5510 HI Series
331 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
13
Tasks at a glance
(Optional.) Configuring access control rights
(Optional.) Configuring NTP authentication
(Optional.) Configuring NTP optional parameters
Enabling the NTP service
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enable the NTP service.
ntp-service enable
By default, the NTP service is not
enabled.
Configuring NTP association mode
This section describes how to configure NTP association modes.
Configuring NTP in client/server mode
When the device operates in client/server mode, specify the IP address for the server on the client.
Follow these guidelines when you configure an NTP client:
• A server must be synchronized by other devices or use its local clock as a reference source
before synchronizing an NTP client. Otherwise, the client will not be synchronized to the NTP
server.
• If the stratum level of a server is higher than or equal to a client, the client will not synchronize to
that server.
• You can configure multiple servers by repeating the ntp-service unicast-server and
ntp-service ipv6 unicast-server commands.
To configure an NTP client:
Command
Remarks
1. Enter system view.
system-view
N/A
2.
the device.
•
Specify an NTP server for
the device:
ntp-service unicast-server
{ server-name | ip-address }
[ vpn-instance
vpn-instance-name ]
[ authentication-keyid keyid
| priority | source
interface-type
interface-number | version
number ] *
• Specify an IPv6 NTP server
for the device:
ntp-service ipv6
unicast-server
{ server-name |
ipv6-address }
By default, no NTP server is
specified for the device.

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals