To Next Page

To Previous Page

251

For more information about error messages, see RFC 4741.

Example for subscribing to event notifications

Network requirements

Configure a client to subscribe to all events with no time limitation. After the subscription is

successful, all events on the device are sent to the client before the session between the device and

client is terminated.

Configuration procedure

# Enter XML view.

<Sysname> xml

# Exchange capabilities.

urn:ietf:params:netconf:base:1.0

</capability>

</capabilities>

</hello>

# Subscribe to all events with no time limitation.

<rpc message-id="101"

xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<create-subscription xmlns ="urn:ietf:params:xml:ns:netconf:notification:1.0">

<stream>NETCONF</stream>

</create-subscription>

</rpc>

Verifying the configuration

# If the client receives the following response, the subscription is successful:

<?xml version="1.0" encoding="UTF-8"?>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">

<ok/>

</rpc-reply>

# If fan 1 on the device encounters problems, the device sends the following text to the client that has

subscribed to all events:

<?xml version="1.0" encoding="UTF-8"?>

<Code>FAN_DIRECTION_NOT_PREFERRED</Code>

<Severity>Alert</Severity>

<context>Fan 1 airflow direction is not preferred on slot 6, please check

it.</context>

</event>

</notification>

HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Guide

Other manuals for HPE FlexNetwork 5510 HI Series