IAI SEL User Manual

188
13. Symbol Edit
(Excluding the positioner mode of the SSEL, ASEL and PSEL controller.)
188
173
After determining symbol name, the cursor moves to
the top letter.
If it’s before determination, you can correct the
letters one by one with the BS key.
After determination, the name is corrected by
overwriting all the characters.
Transmit the symbol data to the controller by
pressing the WRT key.
* If you change the screen with the PAGE UP ·
PAGE DOWN or ESC keys before transmitting the
data, the input data will be invalid.
To finish edit, return to the Flash ROM writing screen
with the ESC key.
Press the F1 (Yes) to write the data to Flash ROM.
If not, press F2 (No) key.
During Flash ROM writing, “Please Wait....” blinks.
* Never shut off the power to the controller
during Flash ROM writing.

IAI SEL Specifications

General

Protection Class	IP20
Communication	RS-232C
Control Method	PTP
Number of Axes	Up to 4 axes
Vibration Resistance	4.9 m/s² (0.5 G)
Humidity	20 to 85% RH (non-condensing)