Laser Safety Information
CAUTION:
This product might contain one or more of the following devices: CD-ROM
drive, DVD-ROM drive, DVD-RAM drive, or laser module, which are Class 1
laser products. Note the following information:
v Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable parts
inside the device.
v Use of the controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
(C026)
Attention: The 7226 Storage Enclosure is a precision device that requires
reasonable care in handling to prevent data loss or permanent damage to the
device. Avoid bumping or dropping the 7226 Storage Enclosure or device features.
Ensure all media is removed from the device before the drive is moved.
Handling Static-Sensitive Devices
Attention: Electronic assemblies are sensitive to static electricity discharge. When
handling an electronic component, wrap it an antistatic bag to prevent damage.
Take the following precautions:
v Do not remove the electronic component from the antistatic bag until you are
ready to install it.
v With the component still in its antistatic bag, touch it to the metal frame of an
electrically grounded surface.
v Hold the component by the frame. Avoid touching the solder joints or pins.
v Handle the component carefully to prevent permanent damage.
Chapter 11. Installation and Removal Procedures 137
To Next Page
Loading...
Need help?
General
