About This Guide
This guide describes how to install and use the 7226 Model 1U3 Storage Enclosure.
It contains the following chapters:
Chapter 1, "General Information," describes the 7226 Storage Enclosure, gives the
system requirement, discusses cables, and lists hardware specifications.
Chapter 2, "Installing the 7226 Storage Enclosure into a Rack," describes the steps
required to install or remove the 7226 Storage Enclosure in a rack system.
Chapter 3, "Attaching the 7226 Storage Enclosure to a Host System," describes
step-by-step instructions on how to properly attach and configure the 7226 Model
1U3 Storage Enclosure to a host system.
Chapter 4, "Removing the 7226 Storage Enclosure from a Host System," describes
how to remove the 7226 Storage Enclosure after it has been installed.
Chapter 5, "The DAT 160 Tape Drive Feature," describes the 7226 Model 1U3
Storage Device Enclosure Feature #EU16, the USB DAT160 Tape Drive; and Feature
#5619, the SAS DAT160 Tape Drive.
Chapter 6, "The Half High LTO-5 Tape Drive Feature," describes the 7226 Model
1U3 Storage Device Enclosure Feature #8247, the Half-High LTO-5 SAS Tape Drive;
and the 7226 Model 1U3 Storage Device Enclosure Feature #8248, the Half-High
LTO-5 Fibre Channel Tape Drive.
Chapter 7, "The DVD Drive Features," describes the 7226 Model 1U3 Storage
Device Enclosure Features #1420, the SAS DVD-RAM Drive with the Slim Drive
Tray; #1422, the SAS DVD-RAM Drive without the Slim Drive Tray; #5762, the USB
DVD-RAM Drive with the Slim Drive Tray; and #5767, the USB DVD-RAM Drive
without the Slim Drive Tray.
Chapter 8, "The RDX Removable Disk Drive Feature," describes the 7226 Model
1U3 Storage Device Enclosure Feature #1103, the RDX Docking Station and the
RDX Data Cartridges.
Chapter 9, "The Quad External SAS Cable Feature," describes the 7226 Model 1U3
Storage Device Enclosure Feature #5544, the Quad External SAS Cable.
Chapter 10, "Troubleshooting," provides the procedures required to service the 7226
Model 1U3 Storage Device Enclosure.
Chapter 11, "Installation and Removal Procedures," provides the installation and
removal procedures required to service and upgrade the 7226 Model 1U3 Storage
Device Enclosure.
Chapter 12, "Parts Diagram and Parts List", provides the parts diagram and parts
list required to service the 7226 Model 1U3 Storage Device Enclosure.
Appendix A, “Power Cables,” provides power cable information for different
countries.
© Copyright IBM Corp. 2012 xxi
To Next Page
Loading...
