Appendix B. Safety Inspection Procedures
DANGER
To prevent a possible shock from touching two surfaces with different
protective ground (earth), use one hand, when possible, to connect or
disconnect signal cables. (D001)
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage
on the metal parts of the system or the devices that attach to the system. It is
the responsibility of the customer to ensure that the outlet is correctly wired
and grounded to prevent an electrical shock. (D004)
26415A-00
1
2
3
4
5
6
7
8
9
10
11
Figure 124. Types of Receptacles
© Copyright IBM Corp. 2012 197
To Next Page
Loading...
