EasyManuals Logo

IBM 7226 Service Manual

IBM 7226
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
For IBM Power Systems with Linux Operating System
Verify that the host system software configured the 7226 installed devices
automatically by doing the following:
__ 1. Log into the Linux Operating System( Sles10 SP3 or later and RedHat 5.5 or
later).
__ 2. You can get general information about the tape device from the message log
file. At the command prompt, type,
dmesg | grep st
You will see similar information about the tape device on your screen.
st 0:4:0:0: Attached scsi tape st0
__ 3. You can get general information about the DVD device from the message
log file. At the command prompt, type,
dmesg | grep sr0
You will see the similar information about the DVD device on your screen,
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
__ 4. At the command prompt, type
lsscsi
and press Enter. The command lists all of devices that are installed in 7226
Storage Enclosure and systems. The output of lsscsi command is:
[0:0:0:0] cd/dvd IBM RMBO0040542 SA61 /dev/sr0
[0:4:0:0] tape IBM HH LTO Gen 5 A9Q4 /dev/st0
[0:255:255:255]no dev IBM 572A001SISIOA 0150 -
[1:255:255:255]no dev IBM 572A001SISIOA 0150 -
[2:0:0:0] disk IBM VDASD blkdev 0001 /dev/sda
[2:0:1:0] disk IBM VDASD blkdev 0001 /dev/sdb
__ 5. From the above list, you can identify that there is one DVD-RAM drive and
one Tape drive in the 7261 Storage Enclosure.
__ 6. (Optional) Verify that the Tape Drive can process the tape correctly. You can
use mt command to control tape drive operation and you also can use the
tar command to read/write from tape.
__ 7. (Optional) Verify that the DVD Drive can process the cd-rom correctly. You
can perform the following steps.
a. Find the DVD device name from step 4 such as /dev/sr0.
b. Verify that the /media/cdrom directory exists. If it does not exist, create
it or choose a different directory for step c.
c. At the command prompt, type
mount /dev/sr0 /media/cdrom
d. You can access directories and files on the optical media from the
/media/cdrom directory.
This completes the installation for IBM Power Systems with Linux Operating
System.
40 7226 Storage Device Enclosure Setup, Operator and Service Guide

Table of Contents

Other manuals for IBM 7226

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM 7226 and is the answer not in the manual?

IBM 7226 Specifications

General IconGeneral
ModelIBM 7226
TypeStorage Enclosure
Form FactorRack-mountable
Drive Bays12
Drive TypeHot-swappable
InterfaceSAS
CompatibilityIBM Power Systems
Supported DrivesSAS, SATA
Host Interface6 Gbps
RAID Levels0, 5, 6, 10
Power SupplyRedundant

Related product manuals