IBM System Storage DS3000 User Manual

Table 2-4. Recurring Syntax Elements (continued)
Recurring Syntax Syntax Value
instance-based-repository-spec
repositoryRAIDLevel=repository-raid-level
repositoryDrives=(drive-spec-list)
[enclosureLossProtect=boolean
1
]
[drawerLossProtect=(TRUE | FALSE)
2
]) |
repositorysubsystem=subsystem-number
freeCapacityArea=integer-literal
3
Specify repositoryRAIDLevel with
repositoryDrives. Do not specify the RAID level
or the disk drives with the subsystem. Do not
set enclosureLossProtect when you specify a
subsystem.
count-based-repository-spec
repositoryRAIDLevel=repository-raid-level
repositoryDriveCount=integer-literal
[repositorysubsystemUserLabel=user-label]
[driveType=drive-type
4
]
[enclosureLossProtect=boolean
2
]
[drawerLossProtect=(TRUE | FALSE)
2
]|
[T10PI=(none | enabled)
5
]|
wwID World-Wide Identifier
gid Group Identifier
host-type string-literal | integer-literal
host-card-identifier (1|2|3|4)
backup-device-identifier
(1|n|all)
n is a specific slot number.
Specifying all includes all of the cache backup
devices available to the entire storage subsystem.
nvsram-offset
hex-literal
nvsram-byte-setting
nvsram-value-> 0xhexadecimal |
integer-literal
nvsram-bit-setting
nvsram-mask, nvsram-value-> 0xhexadecimal,
0xhexadecimal | integer-literal
ipv4-address
Four groups of four numeric characters (0-9)
separated by period "."
(0255).(0255).(0255).(0255)
ipv6-address
Eight groups of four hexadecimal characters (0-9
and A-F) separated by semicolon ":"
(02AF):(02AF):(02AF):(02AF):
(02AF):(02AF):(02AF):(02AF)
Chapter 2. About the Script Commands 2-7

IBM System Storage DS3000 Specifications

General

Brand	IBM
Model	System Storage DS3000
Category	Storage
Language	English