IBM System Storage DS3000

Table 2-4. Recurring Syntax Elements (continued)
Recurring Syntax Syntax Value
autoconfigure-logicaldrive-attr-
value-list
autoconfigure-logicaldrive-attr-value-pair
{autoconfigure-logicaldrive-attr-value-pair}
autoconfigure-logicaldrive-attr-
value-pair
driveType=drive-type | raidLevel=raid-level
| subsystemWidth=integer-literal |
subsystemCount=integer-literal |
logicalDrivesPersubsystemCount=integer-
literal
6
| hotSpareCount=integer-literal |
segmentSize=segment-size-spec |
cacheReadPrefetch=(TRUE | FALSE) |
securityType=(none | capable | enabled)
7
|
T10PI=(none | enabled)
5
create-logicalDrive-copy-attr-value-
list
create-logicalDrive-copy-attr-value-pair
{create-logicalDrive-copy-attr-value-pair}
create-logicalDrive-copy-attr-value-
pair
copyPriority=(highest | high | medium | low
| lowest) | targetReadOnlyEnabled=(TRUE |
FALSE) | copyType=(offline | online) |
repositoryPercentOfBase=(20 | 40 | 60 | 120
| default) |
repositoryGroupPreference=(sameAsSource |
otherThanSource | default)
recover-raid-logicalDrive-attr-
value-list
recover-raid-logicalDrive-attr-value-pair
{recover-raid-logicalDrive-attr-value-pair}
recover-raid-logicalDrive-attr-
value-pair
owner=(a | b) | cacheReadPrefetch=(TRUE |
FALSE) | T10PI=(none | enabled)
cache-flush-modifier-setting
immediate, 0, .25, .5, .75, 1, 1.5, 2, 5,
10, 20, 60, 120, 300, 1200, 3600, infinite
serial-number string-literal
usage-hint-spec
usageHint=(multiMedia | database |
fileSystem)
iscsiSession
[session-identifier]
The host port number might be 2, 3, or 4
depending on the type of controller you are
using.
iscsi-host-port (1|2|3|4)
2-8 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide