IBM System Storage DS3000

Start Controller Diagnostic
DS3000: 7.70.xx.xx
DS4000: N/A
DS5000: 7.70.xx.xx
Start Controller Trace
DS3000: 7.77.xx.xx
DS4000: N/A
DS5000: 7.77.xx.xx
Start Disk Pool Locate
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Start Drive Channel Fault Isolation Diagnostics
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Note: For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures
with internal disk drawers.
Start Drive Channel Locate
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Start Drive Initialize
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Note: For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures
with internal disk drawers.
Start Drive Locate
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Note: For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures
with internal disk drawers.
Start Drive Reconstruction
DS3000: 6.17.xx.xx
DS4000: 5.43.xx.xx
DS5000: 7.3x.xx.xx
Note: For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures
with internal disk drawers.
3-30 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide