Start Enclosure Locate
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Start Enhanced Remote Mirroring Synchronization
DS3000: 7.7x.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Start Enhanced FlashCopy Image Rollback
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Start Host Interface Card Diagnostic
DS3000: 7.70.xx.xx
DS4000: N/A.xx.xx
DS5000: 7.70.xx.xx
Start iSCSI DHCP Refresh
DS3000: 6.50.xx.xx
DS4000: N/A
DS5000: 7.6x.xx.xx
Start Logical Drive Initialization
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Start Secure Drive Erase
DS3000: 7.7x.xx.xx
DS4000: Not supported
DS5000: 7.5x.xx.xx
Note: For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures
with internal disk drawers.
Start Storage Subsystem Configuration Database Diagnostic
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Start Storage Subsystem Diagnostic Data Capture
DS3000: 7.35.xx.xx
DS4000: 6.6x.xx.xx
DS5000: 7.3x.xx.xx
Start Storage Subsystem iSNS Server Refresh
DS3000: 6.50.xx.xx
DS4000: N/A
Chapter 3. Script Commands 3-31
To Next Page
Loading...
Need help?
General