IFM O3M150 - Page 25

25
ifm Vision Assistant O3M
UK
Pixel properties
Via this function, the following information about the selected pixel can be displayed:
Field Description
Column | Row Indicates the number of columns and rows of a pixel
x x coordinate of the pixel: current measured value and deviation (related to the world coordinate system)
y y coordinate of the pixel: current measured value and deviation (related to the world coordinate system)
z z coordinate of the pixel: current measured value and deviation (related to the world coordinate system)
Amplitude Amplitude of the pixel
Distance Distance of the pixel to the device
Colour legend
Valid pixel
Invalid pixel (signal too strong or too weak)
Spatially filtered 3D data (→ „10.11 Measuring range“)
Estimated as ground
Pixel detected as disturbed (interference can be produced by neighbouring O3Ms)
Spray / fog / dust detected
Filtered according to distance (if the pixel is outside the set distance, the ifm Vision Assistant is marked as
invalid. )
► Click to open the "pixel properties" window.
► Click on the pixel in the 2D view.
> Position, amplitude and distance of the pixel are indicated in metres.
► Click
to open extended information.
► Click
to close extended information.