ifm Vision Assistant O3M
6
1 Preliminary note
This document describes the following tasks with the 3D sensor of the O3M product family and the ifm
Vision Assistant software:
● Setting the parameters of the sensor (in the following referred to as "device")
● Setting up the applications using the ifm Vision Assistant
● Monitoring the applications with the ifm Vision Assistant
As soon as an application has been installed on the device, the device can be operated without the ifm
Vision Assistant.
1.1 Symbols used
► Instructions
> Reaction, result
[…] Designation of keys and buttons
"…" Name of display text
→ Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
1.2 Safety instructions
Please read the operating instructions prior to set-up of the device. Ensure that the device is suitable for
your application without any restrictions.
If the operating instructions or the technical data are not adhered to, personal injury and/or damage to
property can occur.
1.3 Further documents
Document
Operating instructions
Short instructions
The documents can be downloaded at:
www.ifm.com
To Next Page
Loading...
