CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1 - Page 169
APPENDIX G - ERROR CODES LIST
List of Error Codes (Various)
Code Error Cause Remedy
0 No errors - -
1 Unknown error Error in the firmware code Contact Authorized Service
10 RX message too long Message too long received on
the serial line
Reduce the length of the
message
11 Inconsistent status Error on the serial line status Contact Authorized Service
12 Error during attempt to
transmit via serial
Transmission error on the
serial line
Contact Authorized Service
20 Error in Real Time Clock CPU do not communicate with
the RTC chip
Contact Authorized Service
50 EEPROM Fault - Contact Authorized Service
1000 Unknown command Firmware error Contact Authorized Service
1001 Unknown status Firmware error Contact Authorized Service
1002 Invalid status Firmware error Contact Authorized Service
To Next Page
Loading...
